Description
Queries the voltage measured at the output terminal of the specified channel.
Parameter
Name
Type
Range
Default
<source>
Discrete
{CH1|CH2|CH3|ALL|SERies|
PARallel}
-
Remarks
•
SERies: Queries the total voltage of the present series loop.
•
PARallel: Queries the total voltage of the present parallel loop.
If <source> is omitted, the command queries the voltage measured on the output
terminal of the specified channel.
to query the voltage, current, and
power measured at the output terminal of the specified channel at the same time.
Return Format
The query returns the the voltage measured at the output terminal of the specified
channel, for example, 2.0000.
Examples
:MEAS? CH1 /*Queries the voltage measured at the output terminal of
CH1. The query returns 2.0000.*/
4.7
:MEMory Commands
:MEMory commands are used to save the file to the specified location in internal/
external memory, and delete, read, lock or unlock the file stored in the specified
storage location in internal memory. This series power supply allows you to save the
following five type of files in internal memory.
1. State File (RSF) stores the current system state, including the voltage, current,
OVP, OCP and track function state of each channel as well as the system
parameters.
2. Arb File (RTF) stores the Arb parameters edited (the voltage, current, and time of
each group of parameters).
3. Bitmap File (BMP) stores the screen capture image file.
4. Log File (ROF) stores the waveform data collected in real time at the current
sample rate when the Analyzer is running and the Logger is turned on.
Command System
38
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Summary of Contents for DP2000 Series
Page 1: ......
Page 137: ...d Exit Programming Examples Copyright RIGOL TECHNOLOGIES CO LTD All rights reserved 129...
Page 145: ......
