Parameter
Name
Type
Range
Default
<n>
Integer
{1|2|3}
-
<current>
Real
0 to the maximum current value
of the specified channel
0.1 A
<lim>
Discrete
{MINimum|MAXimum|DEFault}
-
<amp>
Discrete
{UP|DOWN}
-
Remarks
•
If [:SOURce[<n>]] or [<n>] is omitted, the command sets the corresponding
parameter of the channel currently selected.
•
When <current> is selected, the command directly sets the current value of the
specified channel. When MINimum, MAXimum, or DEFault is selected, the
command sets the minimum, maximum, or default current value within the
available range for the specified channel. When UP or DOWN is selected, the
command steps up or down the current according to the step size set in
[:SOURce[<n>]]:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
•
to set the current for the specified channel.
Return Format
The query returns the current, for example, 1.5000.
Examples
:CURR 1.5 /*Sets the current to 1.5 A for the channel currently
selected .*/
:CURR? /*Queries the current of the channel currently selected. The
query returns 1.5000.*/
4.9.2
[:SOURce[<n>]]:CURRent[:LEVel]
[:IMMediate]:STEP[:INCRement]
Syntax
[:SOURce
[<
n>]
]:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
{<
numeric
value>|<def>}
[:SOURce
[<
n>]
]:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]?
[<
def>]
Description
Sets or queries the step size of current for the specified channel.
Command System
58
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Summary of Contents for DP2000 Series
Page 1: ......
Page 137: ...d Exit Programming Examples Copyright RIGOL TECHNOLOGIES CO LTD All rights reserved 129...
Page 145: ......
