Contents
UM2469
2/59
UM2469 Rev 1
Contents
Development toolchains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Demonstration software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Hardware layout and configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
The STM32F7308-DK Discovery kit layout . . . . . . . . . . . . . . . . . . . . . . . .11
The STM32F7308-DK Discovery kit mechanical drawing . . . . . . . . . . . . 13
Embedded ST-LINK/V2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ST-LINK/V2-1 firmware upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Supplying the board through the ST-LINK USB port (default setting) . . 15
Supplying the board through a charger connected to ST-LINK . . . . . . . 16
Supplying the board from E5V (CN3 or CN12) . . . . . . . . . . . . . . . . . . . 17
Supplying the board from an external power supply through USB HS . 17
Supplying the board from an external power supply through USB FS . 18
Programming/debugging when the power supply is not from
Quad-SPI NOR Flash memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21