AIC10/11 EVM Software Driver and Application Examples
5-5
Software Driver
-
AIC10Main.c:
Calls the system management and all
application programs.
-
LoopControl.asm: Main loop control to ensure the loop is running
properly. Checks and displays the DSP status.
-
C5402Vec.asm:
Sets up C5402 interrupt vector table.
-
C5402Init.asm:
Initializes C5402 memory mapping registers (MMRs)
and sets up the DSP for user applications.
-
AIC10Init.asm:
Reads from AIC10/11 devices to recognize the hard-
ware configuration. Writes to CRs in all onboard
AIC10/11 devices to control and initialize
communications.
5.3.3
User Application Programs
There are several examples of application programs included with the EVM
system, or supplied on the TI website. These application programs, as well as
customer developed application programs, may be used. Example application
programs are:
-
DTMFTone.c:
DTMF tone generation program
-
SecurityVoice.c:
Changes the microphone input to secure voice. The
identity of voice over the speaker cannot be identified.
-
EchoCancel.c:
Echo cancellation program
-
VoiceOverIP.c:
VoIP program (under construction)
Summary of Contents for TLV320AIC10 EVM
