25
NOTE
:
DBA based on the entire ONT schedule, we need to select the appropriate bandwidth type and
bandwidth size according to the service type and ont users number. The summation of fixed
bandwidth (fix) and guarantee bandwidth (assure) not surpass the total bandwidth of PON port.
5.4.2 Create ONT Lineprofile
OLT(config)#
ont-lineprofile gpon profile-id 1
OLT(config-ont-lineprofile-1)#
tcont 1 dba-profile-id 1
Create a different GEM Port for different business types. Among them
GEM port 1 is used to carry Internet service.
GEM port 2 is used to carry voice service.
GEM port 3 is used to carry video services.
OLT(config-ont-lineprofile-1)#
gem add 1 tcont 1
OLT(config-ont-lineprofile-1)#
gem add 2 tcont 1
OLT(config-ont-lineprofile-1)#
gem add 3 tcont 1
Configure GEM PORT mapping-mode as VLAN.
OLT(config-ont-lineprofile-1)#
mapping-mode vlan
Different GEM ports are mapped to different vlan for different service types. Among them,
Map the GEM port with index 1 to VLAN 100 to carry the Internet service.
Map the GEM port with index 2 to VLAN 200 to carry the voice service.
Map the GEM port with index 3 to VLAN 300 to carry the video service.
OLT(config-ont-lineprofile-1)#
gem mapping 1 1 vlan 100
OLT(config-ont-lineprofile-1)#
gem mapping 2 1 vlan 200
OLT(config-ont-lineprofile-1)#
gem mapping 3 1 vlan 300
After the configurations are complete, run the commit command to apply theparameters setting.
OLT(config-ont-lineprofile-1)#
commit
OLT(config-ont-lineprofile-1)#
exit
5.4.3 Create ONT Srvprofile
Create GPON ONT
srvprofile,
number is 1, configure ONT ETH port number and POTS port
number to adaptive:
OLT(config)#
ont-srvprofile gpon profile-id 1
OLT(config-ont-srvprofile-1)#
ont-port eth adaptive
OLT(config-ont-srvprofile-1)#
ont-port pots adaptive
OLT(config-ont-srvprofile-1)#
commit
OLT(config-ont-srvprofile-1)#
exit