82
4-1 Programming command syntax
4-1-1 Single-parameter setting
Format
Prefix
Parameter index
D/H
Value
Storage
Prefix: <SYN> M <CR> (ASCII 0x16, 0x4D, 0x0D).
Parameter index: Each parameter has a unique 4-digit index which is similar to the option barcode listed in 6
Parameter Menus, except that there is no leading ‘%’ and ending “M%” in the Parameter index.
D/H: This is used by the embedded scanner to identify the numeral system of Value. ‘D’ indicates a decimal number
while ‘H’ indicates a hexadecimal number.
Value: This is generally a 2-digit number except for string-setting parameters, e.g. Prefix string setting. Storage: A
single character that specifies the storage area to which the command is applied to. An exclamation point ‘!’ performs
the command’s operation on the volatile memory. A period ‘.’ performs the command’s operation on the device’s non-
volatile memory. Using ‘!’ only when the setting needs to function through a single power cycle (Parameter value will
be lost when power remoned or the scanner enters Standby mode).
Example1: Set 0401->03 (decimal). The command is as following.
Prefix
Parameter index
D
Value
.
0x16 0x4D 0x0D
0x30 0x34 0x30 0x31
0x44
0x30 0x33
0x2E
Example2: Set 8002->0D0A (hexadecimal). The command is as following.
Prefix
Parameter index
H
Value
.
0x16 0x4D 0x0D
0x38 0x30 0x30 0x32
0x48
0x30 0x44 0x30 0x41
0x2E
4-1-2 Multiple-parameter setting
Format
Prefix
Parameter index 1
D/H
Value 1
;
···
Parameter index N
D/H
Value N
Storage
Prefix: Refer to Prefix of
4-1-1Single-parameter setting
.
Parameter index 1 to Parameter index N: Refer to Parameter index of
4-1-1Single-parameter setting
.
D/H: Refer to D/H of
4-1-1Single-parameter setting
.
Value 1 to Value N: Refer to Value of
4-1-1Single-parameter setting
.
Storage: Refer to Storage of
4-1-1Single-parameter setting
.
Example: Set 0401->03 (decimal), 8002->0D0A (hexadecimal). The command is as following.
Prefix
Parameter index
D
Value
;
Parameter index
H
Value
.
0x16 0x4D 0x0D
0x30 0x34
0x30 0x31
0x44
0x30
0x33
0x3B
0x38 0x30
0x30 0x32
0x48
0x30 0x44
0x30 0x41
0x2E
Summary of Contents for ES700
