Manual VIPA HMI
Chapter 2
Deployment Touch Panel
HB160E - TP - RE_62F-DCB0 - Rev. 11/14
2-27
The configuration of a network printer happens with the following approach:
•
Enter this command into the command prompt:
\>
net use printer name network printer
Example:
Printer name: Printer, network printer: \\testserver\printer
Entry: \>
net use printer \\testserver\printer
•
Enter
user name, password
and if necessary
user group
.
After the successful login the following message appears
Successfully mapped to network printer
The printer may now be accessed as "network\printer".
For example you may print the content of the current directory using \>
dir
> network\printer
.
The listing command for all network connections of your Touch Panel is
\>
net use
You may terminate already assigned network resources via
\>
net use local_name /d
Example: \>
net use data /d
deletes the network connection to the
drive "archive" of "test server".
Note!
To save the settings also after power on, you have to store them to the
registry with
START
>
Programs
>
KuK_Tools
>
KuK Tools
[Store].
Configure network
printer
Test print
List network
connections
Terminate network
connections
\> net use
Connected resources:
Status Local Name Remote Name
----------------------------------------------------------------
Connected data \\testserver\archiv
Connected printer \\testserver\printer
Command completed successfully
\>
█
