Stereo Sound & CD-ROM
O Device=[drive:]\DEV\ SLCD.SYS [/B:xxx]
[IVidevice name]
O LAS TD RIVE =
drive letter
/B:xxx
xxx is the I/O port address as set on SI of the sound card. The
default is 320H.
/Didevice name
specifies device driver name that is used by the Microsoft MS-
DOS CD-ROM extension file as MSCDEX. MSCD000 is the
commonly used device driver name, when none is specified.
/ Lastdri
\c:—drive letter
Enter the proper drive letter name according to your system
configuration. For example, if you already have 3 hard drives, use
" f \ If this qualifier is not specified, the default used by DOS is
"e".
Step 2. Add the following line to the file "AUTOEXEC.BAT" under
your boot hard disk root-directory (Drive C in general).
O [drive:][path] MSCDEX l/D:device name] [/M:n] [/E] [/V]
[/L:drive letter]
NOTE:
The actual MSCDEX.EXE command line in the autoexec.bat file
is not truncated and should be placed entirely
011
one line.
[drive:][path] MSCDEX.EXE
Specifies the location (drive and directory) of the MSCDEX.EXE
file. The default setting is the BIN director}' of the boot drive
ID: device name
Specifies the name of the CD-ROM drive (8 characters maximum).
This must be identical to the device name specified in the device
driver in the CONFIG.SYS file. For example:
O C:\BIN\MSCDEX.EXE /D:MSCD000
[/M:n]
Specifies the number of sector buffers for temporary storage of
the most recent disc data. For example to specify ten sector
buffers you would use:
O C:\BIN\MSCDEX.EXE /D:MSCD000 /M:10
Page -17