Alcatel-Lucent OmniAccess 5510 ADSL Reference Manual Download

Page: 403 / 792

ip ospf cost

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

375

Alcatel-Lucent

Beta

OmniAccess 5510 Unified Services Gateway CLI Command Reference Guide

OSPF

COST

ip ospf cost

<1-65535>

ESCRIPTION

This command is entered in the Interface Configuration Mode. This command
explicitly specifies the cost of sending a packet on an OSPF interface.

Note:

The value set by the ‘ip ospf cost’ command overrides the cost resulting from the auto-
cost command.

ARAMETERS

EFAULT

ALUE

The default cost is calculated based on the interface bandwidth.

XAMPLE

ALU(config-if FastEthernet0)# ip ospf cost 100

OSPF

DATABASE

FILTER

ALL

OUT

ip ospf database-filter all out

ESCRIPTION

This command is entered in the Interface Configuration Mode. Enables filtering of
outgoing LSAs on OSPF interface.

ARAMETERS

None.

EFAULT

ALUE

By default, database-filtering is not enabled. All outgoing LSAs are flooded to the
interface.

XAMPLE

ALU(config-if FastEthernet0)# ip ospf database-filter all out

Parameter

Description

1-65535

Unsigned integer value expressed as the link-state metric.

Summary of Contents for OmniAccess 5510 ADSL

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5510 ADSL

Reviews:

Related manuals for OmniAccess 5510 ADSL

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5510 ADSL, Reference Manual

Search results

Summary of Contents for OmniAccess 5510 ADSL

Reviews:

Related manuals for OmniAccess 5510 ADSL

Brands by name

Popular brands