Multicast Routing
Left running head:
Chapter name (automatic)
420
Beta
Beta
OmniAccess 5510 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IP
PIM
NEIGHBOR
-
FILTER
ip pim neighbor-filter
{<
1-99
>|<
standard access-list-name>
}
D
ESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to prevent PIM router from forming neighborship with other router. Using
access-list, you can specify permitted neighbors.
P
ARAMETERS
D
EFAULT
V
ALUE
By default, PIM router forms neighborship with all the routers on an interface.
E
XAMPLE
ALU(config-if FastEthernet0)# ip pim neighbor-filter acc-list1
IP
PIM
RP
-
ADDRESS
ip pim rp-address
<
ip-address
> [
override
]
D
ESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the RP router address for all multicast groups.
Note:
All routers in the PIM domain should have same RP address for a multicast group.
P
ARAMETERS
D
EFAULT
V
ALUE
None.
E
XAMPLE
ALU(config)# ip pim rp-address 11.0.0.3
Parameter
Description
1-99
Standard access-list number.
standard ip
access-list-name
Name of the IP standard access list. Use this to specify
permitted neighbors.
Parameter
Description
ip-address
RP router address.
override
This is used to give preference to static RP over dynamic RP.
