3 SCPI
3.3 Instrument subsystem command
62
GATEd
Source is Gate.
TRIGgered
Auto mode is activated. In this mode, the period is the external sync
pulse period, and the pulse width is the local pulse width setting.
JITTered
Source is Jittered.
STAGger
Source is Staggered.
SLIDing
Source is Sliding.
Example:
:PULM:SOURce SQUare Set Source to Square.
Reset status:
INT
Key Entry:
【
Pulse
】
—>[Basic Config]—>[Source]
[:SOURce]:PULM:STATe <State>
Function:
This command sets whether to output the pulse modulation signal of the signal
generator.
Setting format:
[:SOURce]:PULM:STATe ON|OFF|1|0
Query format:
[:SOURce]:PULM:STATe?
Parameter:
<State> Boolean data is as follows:
ON | 1: Pulse Modulation is turned on,
OFF | 0: Pulse Modulation is turned off.
Example:
:PULM:STATe 1 Pulse Modulation is turned on.
Reset:
0
Key Entry:
【
Pulse
】
—>[Basic Config]—>[Pulse Modulation ON OFF]
[:SOURce]:PULM:INTernal:JITTered:MODE <Mode>
Function:
This command is used for setting the jitter modes of pulse modulation period, which
include Random and Gaussion. At Random mode, the pulse period changes from 0 to
10% at random; at Gaussion mode, it changes from 0 to 10% in Gaussian distribution.
Setting format:
[:SOURce]:PULM:INTernal:JITTered:MODE UNIForm|GAUSsian
Query format:
[:SOURce]:PULM:INTernal:JITTered:MODE?
Parameter:
<Mode> Discrete data. Options for PRF jitter mode for pulse modulation are:
UNIForm | 0: Random,
GAUSsian | 1: Gauss.
Example:
[:SOURce]:PULM:INTernal:JITTered:MODE GAUS Set PRF jitter mode to Gaussion.
Reset status:
GAUS
Key Entry:
【
PULSE
】
—>[Jittered]—>[Dither Style]
[:SOURce]:PULM:INTernal:JITTered:PERCent <Percent>
Function:
This command is used for setting PRF jitter percentage of pulse modulation signal. When
the pulse source is set to Jittered, this percentage will change the pulse period while
the pulse width will remain unchanged.
Setting format:
[:SOURce]:PULM:INTernal:JITTered:PERCent <val>
Summary of Contents for 1465 Series
