3 SCPI
3.3 Instrument subsystem command
86
[:SOURce]:DM:EXTernal:BWIDth[:STATe] <State>
Function:
This command sets the ON/OFF state of Ext WideBand I/Q Input.
Setting format:
[:SOURce]:DM:EXTernal:BWIDth[:STATe] ON|OFF|1|0
Query format:
[:SOURce]:DM:EXTernal:BWIDth[:STATe]?
Parameter:
<State> Boolean data is as follows:
ON | 1: Ext WideBand I/Q Input is turned on,
OFF | 0: Ext WideBand I/Q Input is turned off.
Example:
:DM:EXT:BWID:STATe 1 Ext WideBand I/Q Input is turned on.
Reset status:
0
Key Entry:
【
I/Q
】
—>[Base Config]->[ Ext WideBand I/Q Input ON OFF]
[:SOURce]:DM:IQADjustmentOUTPut[:STATe] <State>
Function:
This command sets I/Q Output Adj to ON/OFF state.
Setting format:
[:SOURce]:DM:IQADjustment:OUTPut[:STATe] ON|OFF|1|0
Query format:
[:SOURce]:DM:IQADjustment:OUTPut [:STATe]?
Parameter:
<State> Boolean data is as follows:
ON | 1: I/Q Output Adj is turned on,
OFF | 0: I/Q Output Adj is turned off.
Example:
DM:IQADjustment:OUTPut 1 I/Q Output Adj is turned on.
Reset status:
0
Key Entry:
【
I/Q
】
—>[ I/Q Output Adj]—>[ I/Q Output Adj ON OFF]
[:SOURce]:DM:IQADjustment:OUTPut:ATTen <Atten >
Function:
This command is used for setting the attenuation value for I/Q output adjustment. This
command will be valid when I/Q Output Adj is set to ON. For enabling or disabling I/Q
output adjustment function, see the command ―
DM:IQADjustment:OUTPut
‖.
Setting format:
[:SOURce]:DM:IQADjustment:OUTPut:ATTen <val>.
Query format:
[:SOURce] :DM:IQADjustment:OUTPut:ATTen?
Parameter:
<Atten> Attenuation of I/Q Output Adj.
Range: 0dB [0dB
，
94.5dB].
Example:
:DM:IQADjustment:OUTPut:ATTen 10dB Set I/Q output attenuation value to 10dB.
Reset status:
0
Key Entry:
【
I/Q
】
—>[ I/Q Output Adj]—>[Attenuation]
[:SOURce]:DM:IQADjustment:OUTPut:GAIN <Gain >
Function:
This command is used for setting Gain Balance of I/Q output adjustment. This command
will be valid when I/Q Output Adj is set to ON. For enabling or disabling I/Q Output
adjustment function, see the command ―
DM:IQADjustment:OUTPut
‖.
Setting format:
[:SOURce]:DM:IQADjustment:OUTPut:GAIN <val>.
Summary of Contents for 1465 Series
