Description
Command
CLI Mode
Sets a single next-hop IP address so that
multiple VLANs can use a single next-hop
gateway. The vlan-map is associated with
a specific interface.
vlan-map next-hop ipv4_address
Ethernet Interface Configuration Mode
Enters VLAN Configuration mode.
vlan vlan_id
Ethernet Port Configuration Mode
Enables or disables traffic over a specified
VLAN. See below.
[no] shutdown
PVC Configuration Mode
Configures the subscriber VLAN ID that is
used with the assigned address for the
subscriber session to receive packets. If the
IP pool from which the address is assigned
is configured with a VLAN ID, this
subscriber configured VLAN ID overrides
it.
ip vlan vlan_id
Subscriber Configuration Mode
Binds a virtual interface and context to
support VLAN service.
bind interface interface_name
context_name
VLAN Configuration Mode
Enables or disables port ingress incoming)
mode.
[no] ingress-mode
VLAN Configuration Mode
Configures an 802.1p VLAN priority bit
for ASN-GW service only.
priority value
VLAN Configuration Mode
Enables or disables traffic over the current
VLAN.
[no] shutdown
VLAN Configuration Mode
Associates an IP interface having a VLAN
ID with a context.
vlan-map interface if_name
context_name
VLAN Configuration Mode
Table 16: VLAN-Related Monitoring Commands
Description
Command
CLI Mode
Clears NPU statistics for the port that has
a previously configured VLAN ID.
clear port slot/port vlan vlan_id
Exec Mode show commands
Displays VLAN utilization for a specified
collection interval.
show logical-port utilization table vlan
{ 5-minute | hourly }
Exec Mode show commands
Displays NPU counters for a previously
configured VLAN ID.
show port info slot/port vlan vlan_id
Exec Mode show commands
ASR 5500 System Administration Guide, StarOS Release 21.5
240
VLANs
VLAN-Related CLI Commands