19
COMMAND
Description and Parameters
set_serial_allow
Enable/disable serial bypass support.
Available values for
N1:
0
[Disable]
1
[Enable]
Note: Valid on Receiver 1 only.
get_serial_allow
Show the current serial bypass support state.
Note: Valid on Receiver 1 only.
set_serial_baud N1
Set the serial baud rate.
Available values for
N1:
0
[300 baud]
1
[600 baud]
2
[1200 baud]
3
[2400 baud]
4
[4800 baud]
5
[9600 baud]
6
[19200 baud]
7
[38400 baud]
8
[57600 baud]
9
[115200 baud]
Note: Valid on Receiver 1 only.
get_serial_baud
Show the current serial baud rate.
Note: Valid on Receiver 1 only.