8.Features
© China Daheng Group, Inc. Beijing Image Vision Technology Branch 132
DeviceLinkThroughputLimitMode, DeviceLinkThroughputLimit
OffsetX, OffsetY, Width, Height
PixelFormat
TestPattern
TriggerMode, TriggerSource, TriggerPolarity, TriggerDelay
TriggerFilterRisingEdge, TriggerFilterFallingEdge
ExposureTime
ExposureAuto, AutoExposureTimeMax, AutoExposureTimeMin
AAROIOffsetX, AAROIOffsetY, AAROIWidth, AAROIHeight
ExpectedGrayValue
LineMode, LineInverter, LineSource, UserOutputValue
Gain
GainAuto, AutoGainMax,AutoGainMin
BalanceRatio
BalanceWhiteAuto, AWBLampHouse
AWBROIOffsetX, AWBROIOffsetY, AWBROIWidth, AWBROIHeight
DeadPixelCorrect
ChunkModeActive, ChunkEnable
Load parameters (UserSetLoad):
Load the vendor default configuration parameters or the user
configuration parameters into the effective configuration parameters. After this operation is performed, the
effective configuration parameters will be covered by the loaded parameters which are selected by the
user, and the new effective configuration parameters are generated. The operation steps are as follows:
1) Use UserSetSelector to select Default or UserSet0.
2) Execute UserSetLoad command to load the UserSet specified by UserSetSelector to the device and
makes it active.
Change startup parameter set (UserSetDefault):
The user can use UserSetDefault to select Default or
UserSet0 as the UserSetDefault. When the camera is reset or powered on again, the parameters in the
UserSetDefault will be loaded into the effective configuration parameters.
