PTD55 SERIES OPERATION MANUAL
[Example]
Example data for printing “Ref. 258710”
In this example, the printer first prints “No.” Using CODE B, then prints the following
numbers using CODE C.
GS k
73 11 123 66 82 101 102 46 123 67 25 87 10
3. If the top of the bar code data is not the code set selection character, the
printer stops command processing and processes the following data as
normal data.
4. If the combination of “{“ and the following character does not apply any
special character, the printer stops command processing and processes
the following data as normal data.
5. If the printer receives characters that cannot be used in the special code
set, the printer stops command processing and processes the following
data as normal data.
6. The printer does not print HRI characters that correspond to the shift
characters or code set selection characters.
7. HRI character for the function character is space.
8. HRI characters for the control character (<00>H to <1F>H and <7F>H) are
space.
<Others> Be sure to keep spaces on both right and left sides of a bar code.
(Spaces are different depending on the types of the bar code.)
[Reference]
GS h, GS w
GS
v
0
m
xL
xH
yL
yH
d1
...
dk
[Name]
Print raster bit image
[Format]
ASCII
GS
v
0
m
xL xH yL yH d1...dk
Hex
1D
76
30
m
xL xH yL yH d1...dk
Decimal29
118
48
m
xL xH yL yH d1...dk
[Range]
<00>H
≤
m
≤
<03>H
<00>H
≤
xL
≤
<FF>H
<00>H
≤
xH
≤
<FF>H where 1
≤
(
xL
+
xH
x 256)
≤
128
<00>H
≤
yL
≤
<FF>H
<00>H
≤
yH
≤
<08>H where 1
≤
(
yL
+
yH
x 256)
≤
4095
<00>H
≤
d
≤
<FF>H
k
=
(
xL
+
xH
x 256) x
(
yL
+
yH
x 256)
(
k
≠
0)
[Description]
●
Selects raster bit-image mode. The value of
m
selects the mode, as follows:
m
Mode
Vertical Dot Density
Vertical Dot Density
<00>H
Normal
203.2 dpi
203.2 dpi
<01>H
Double-width
203.2 dpi
101.6 dpi
<02>H
Double-height
101.6 dpi
203.2 dpi
<03>H
Quadruple
101.6 dpi
101.6 dpi
(dpi: dots per 25.4 mm {1"})
47 of 57
