RS-232 / TELNET COMMANDS
59
#set_output_name Command
The #set_output_name command provides a name to the selected output. For example,
“Output 1” could be renamed as “HDDisplay”. The maximum string length for
param2
is
8 characters. Special characters and spaces are not permitted. If needed, use the
underscore character (“_”) to separate characters.
Syntax:
#set_output_name param1 param2
Parameters:
param1
Output
[A ... H]
param2
Name
Example:
#set_output_name C Sony_XBR7
Sony_XBR7 NAME IS ASSIGNED TO OUTPUT C
#set_preset_name Command
The #set_preset_name command names the specified preset. The preset name can be up
to 8 characters in length. Special characters and spaces are not permitted. If needed, use
the underscore character (“_”) to separate characters.
Syntax:
#set_preset_name param1 param2
Parameters:
param1
Preset
[1 ... 8]
param2
Name
Example:
#set_preset_name 3 BluRayAmp
BluRayAmp NAME IS ASSIGNED TO PRESET 3
