eSpace IAD
Troubleshooting
2 Analy zing and Rectify ing Faults
Issue 02 (2012-02-29)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48
Solution
Step 1
Configure the VLAN data on the broadband (assume that the voice VLAN ID is 10 and data
VLAN ID is 129). If the VLAN is not configured on the upstream switch, this data does not
need to be configured.
Configuration example:
IAD2000(config)#lanswitch
//Configure the voice VLAN tag.
IAD2000(lanswitch)#vlan vlanid 10 interface 9 untagged 10 tagged
IAD2000(lanswitch)#tag interface 9 pvid 10 priority 7
//Configure the data VLAN tag.
IAD2000(lanswitch)#vlan vlanid 129 interface 1 untagged 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 2 untagged 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 3 untagged 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 4 untagged 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 5 untagged 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 6 untagge d 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 7 untagged 10 tagged
IAD2000(lanswitch)#vlan vlanid 129 interface 8 untagged 10 tagged
IAD2000(lanswitch)#tag interface 1 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 2 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 3 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 4 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 5 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 6 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 7 pvid 129 priority 0
IAD2000(lanswitch)#tag interface 8 pvid 129 priority 0
write
Step 2
IAD208 of the V300R001C03SPC800 version or earlier versions uses the same VLAN
configuration command. If the VLAN is not configured on the upstream switch, you do not
need to configure the VLAN data on the IAD.
Step 3
If the fault persists after you perform the preceding operations, contact Huawei technical
support engineers.
----End
2.3.12 IAD Cannot Register with ZTE IMS Using SIP
Symptom
Network: IAD-ONU- ZTE IMS
ZTE IMS does not respond to the registration message sent by the IAD while the soft client
can register with ZTE IMS.