Chapter 4: Commands for CLI configuration
ip-subnet
Show VLAN ip-subnet entries
id
Show a specific ip-subnet entry
Default:
N/A
Usage Guide:
To display the
IP-based
VLAN
information.
Example:
To display the
IP-based
VLAN
information
.
Switch #
show vlan ip-subnet
VCE ID IP Address Mask Length VID Interfaces
------ --------------- ----------- ---- ----------
1 192.168.78.0 24 5 GigabitEthernet 1/1
show vlan mac
Command:
show vlan mac [ address <mac_addr> ]
show
Show running system information
vlan
VLAN status
mac
Show VLAN MAC entries
address
Show a specific MAC entry
Default:
N/A
Usage Guide:
To display the
MAC-based
VLAN
information.
Example:
To display the
MAC-based
VLAN
information
.
Switch #
show vlan mac
MAC Address VID Interfaces
----------- --- ----------
00-40-55-00-00-00 1 GigabitEthernet 1/1
show vlan protocol
Command:
show vlan protocol [ eth2 { <etype> | arp | ip | ipx | at } ] [ snap
{ <oui> | rfc-1042 | snap-8021h } <pid> ] [ llc <dsap> <ssap> ]
show
Show running system information
vlan
VLAN status
protocol
Protocol-based VLAN status
eth2
Ethernet protocol based VLAN status
<etype>
Ether Type(Range: 0x600 - 0xFFFF)
arp
Ether Type is ARP
at
Ether Type is AppleTalk
ip
Ether Type is IP
ipx
Ether Type is IPX
NS3500-24T-4C Managed Switch Command Guide
319
