13-28 Factory Scripts
Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006
Return to
TSP Project Name:
KIFactoryPulse
TSP Test Script Name:
KIPulse
Firmware Version:
1.2.0 and later
Function:
QueryPulseConfig
Usage:
tbl = QueryPulseConfig(tag)
Description: Once a pulse train has been configured and assigned to a tag, it is often
times desirable to inspect the settings of this pre-configured pulse train.
QueryPulseConfig()
can be used for this purpose. This function will
return a table containing the various settings associated with the tag input
parameter.
Parameters: tag:
Numeric identifier of pulse train configuration being queried.
Return
Values:
tostring():
A function that returns most elements in a string
convenient for printing.
tag:
Identifying tag for this pulse train.
smu:
The smu configured for pulsing.
func:
Pulse function:
smuX.OUTPUT_DCAMPS
or
smuX.OUTPUT_DCVOLTS
bias:
Pulse bias level.
level:
Pulse level for non sweeping pulses.
start:
Starting level for sweep pulses.
stop:
Ending level for sweep pulses.
limit:
Limit value.
ton:
On time in seconds.
toff:
Off time in seconds.
points:
The number of points in this pulse train.
buf:
Reference to buffer containing measurement
data.sync_in:
The sync_in digio line, if used.
sync_out:
The sync_out digio line, if used.sourcevalues: A table
containing the source value for each point in the pulse
train.
sourcevalues:
A table containing the source value for each point in the
pulse train.
Output
Data:
None
Summary of Contents for SourceMeter 2600 Series
Page 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Page 592: ......
Page 593: ......
