15
DRIVING,A,V1,V2,T#
Set driving behavior parameter
A: Sharp turn
,
value range 0-180
,
default is 0: disable
V1: hard acceleration
,
value range 0-255
,
default is 0: disable the function
V2:hard deceleration
,
value range 0-255
,
default is 0: disable the function
T:Hard deceleration and acceleration time
,
1-30
,
default is 4 seconds
Example:
DRIVING,15,30,50,4#
Direction changes exceedes 15°, indicates the vehicle is in sharp turn status
30km/h Speed increased 30km/h within 4 seconds, indicates vehicle is in hard
deceleration status,
50km/h Speed reduced 50km/h, indicates the vehicles in hard deceleration status ,
DRIVING#
LBS,
A
#
Set LBS ON and OFF
:
,
A=1 ON
;
A=0 OFF
,
Default is off
Example:
LBS,1# LBS ON
LBS,0# LBS OFF
LBS# Query
LOCKACCOFF,A#
Set vehicle lock logic
:
A=0 Receive lock command, execute immediately
A=1 Receive lock command, if ACC is off, execute immediately, if ACC is on, store
this command until ACC off
A=2 Store the command, lock vehicle from ACC Off to On, if the communication is
well, lock vehicle, otherwise wait for next turn
For example
:
LOCKACCOFF,0# means execute the lock command immediately after
receiving it
*22*2#
Lock vehicle
*22*3#
Unlock vehicle
*77*0number#
Set center No.1
*77*2 number#
Set center No.2
*11*1#
Query center No.
*11*2#
Query longitude and latitude
*11*3#
Query device status
Eg:
Online: IP1 CMNET,119.23.233.52:6000,T ID: 80222001633,id GPS=A,5;GSM=20
MT02S-4.12.128.10 2019-08-06
*22*1#
Restore to factory setting
*22*4#
Reboot device
GPS Talks