REMOTE CONTROL COMMAND PROTOCOL
9 / 32
17. Non Zoom Tracking External PRESET Move Control
; Move the Zoom and Focus lens to each position and set the
Digital Zoom ratio according to data memorized in PRESET “Buffer RAM” designated ‘ INDEX’ ,
0xC5
0x4D
INDEX
0x00
CAM_ID
C·S
2) Camera -> PC
0xC5
0x4D
C·S
INDEX
0x00
INDEX
0xXX
0xXX
0xXX
1) PC -> Camera
a) INDEX ; Position setting index of PRESET Buffer RAM to change Zoom, Focus & Digital Zoom position.
Caution ; The range of INDEX is from 0x00 to 0x07.
18. Camera RESET
; Reset the Camera’s micro controller ( u-COM ).
0xC5
0x4F
0x00
0x00
CAM_ID
C·S
2) Camera -> PC
0xC5
0x4F
C·S
0x00
0x00
0x00
0xXX
0xXX
0xXX
1) PC -> Camera
19. Digital Zoom Power Adjust
; Adjust Digital Zoom Max Power.
0xC5
0x52
INDEX
0x00
CAM_ID
C·S
2) Camera -> PC
0xC5
0x52
C·S
INDEX
0x00
INDEX
0xXX
0xXX
0xXX
1) PC -> Camera
a) INDEX ; Index value for setting Digital Zoom Max Power .
1. In case of INDEX = 0, the Digital Zoom Max Power = 2 X. Therefore, Total Zoom = 32 X .
2. In case of INDEX = 1, the Digital Zoom Max Power = 3 X. Therefore, Total Zoom = 48 X .
3. In case of INDEX = 2, the Digital Zoom Max Power = 4 X. Therefore, Total Zoom = 64 X .
4. In case of INDEX = 3, the Digital Zoom Max Power = 5 X. Therefore, Total Zoom = 80 X .
5. In case of INDEX = 4, the Digital Zoom Max Power = 6 X, Therefore, Total Zoom = 96 X .
6. In case of INDEX = 5, the Digital Zoom Max Power = 7 X. Therefore, Total Zoom = 112 X .
7. In case of INDEX = 6, the Digital Zoom Max Power = 8 X. Therefore, Total Zoom = 128 X .
