MULTIDOS
RS232 Interface
Application Dual Channel Dosemeter
D177.131.2/0
9
7 Application Dual Channel Dosemeter
Telegrams containing parameters alter a setting. If the parameter is omitted in the telegram, the actual setting is
returned. For clarification parameters are printed in
italic
.
Example:
I0044
sets the interval time,
I
reads the actual interval time and is answered by
I0044.
7.1 Basic Settings
Telegram
Description
Response
PW
xP
Set/Read the password protection. Parameter
x
: 0 = clear protection, 1 =
Set protection. P is the password string as described in the MULTIDOS
User Manual
PWx
Q
x
Set/Read the type of data readings on the display. Parameter
x
: 0 = abso-
lute values, 1 = relative values (channel 2 divided by channel 1)
Qx
R
xy
Set/Read range settings. Parameter
x
: setting of channel 1. Parameter
y
:
setting of channel 2. Valid values of
x
and
y
: L = Low, H = High, - = keep
current setting.
Valid values of the response
o
and
t
: L or H.
o
is the setting of channel 1,
t
the setting of channel 2
Rot
R
xy
Set/Read range settings. Parameter
x
: setting of channel 1. Parameter
y
:
setting of channel 2. Valid values of
x
and
y
: L = Low, H = High, - = keep
current setting.
Valid values of the response
o
and
t
: L or H.
o
is the setting of channel 1,
t
the setting of channel 2
Rot
SET
s
Set/Read the calibration set to be applied. Parameter
s
: 1 up to 5
SETs
SP
Read the protection setting of the calibration data. Parameter p is a one
digit number, whose bits show the protection status: bit .0 is set = pass-
word protection is set, bit .1 is set = hardware protection is active
SPp
U
x
Set/Read unit of measurement. Parameter
x
: A = Ampere, S = Gy/s, M =
Gy/min, H = Gy/h
Ux
