60
7. Linux
Linux
3.Making driver module
(1)Copying the driver source file
Copy the driver source file to the directory which includes PCMCIA Client Driver source.
(The directory normally means pcmcia-cs clients directory)
If there is the extracted driver source file in the directory /root/cb32, type the command as written below.
# cd /usr/src/linux-2-2.12/pcmcia-cs-3.0.14/clients
# cp /root/cb32/src/* .
# cp /root/cb32/lib/* .
The cb32i850.c , cb32i850.h , cb32scsi.c , cb32scsi.h , load_fw.o files will be copied.
(2)Editing Makefile
Add the seven lines below to Makefile in the clients directory to compile cb32_cb.
cb32_cb.o : cb32i850.c cb32scsi.c cb32i850.h cb32scsi.h
$(CC) -MD -c $(XFLAGS) $(CPPFLAGS) I$(LINUX) cb32i850.c -o cb32i850.o
@mkdir -p .depfiles ; mv cb32i850.d.depfiles
$(CC) -MD -c $(XFLAGS) $(CPPFLAGS) I$(LINUX) cb32scsi.c -o cb32scsi.o
@mkdir -p .depfiles ; mv cb32scsi.d.depfiles
$(LD) r o $@ cb32i850.o cb32scsi.o load_fw.o
rm -f cb32i850.o cb32scsi.o ; chmod x $@
Refer to the Makefile in the [samples] folder.
(3)Editing proc_fs.h
Go to the include/linux directory.
# cd /usr/src/linux-2.2.12/include/linux
Edit proc_fs.h to add [PROC_SCSI_CB32, ] right after [PROC_SCSI_INIA100, ] line.
Refer to the proc_fs.h in the [samples] folder.
If you can find proc_fs.h in the directory /usr/include/linux, edit it in the same way.
(4)Compiling cb32_cb
Compile cb32_cb with make command.
# make cb32_cb.o
Caution: If you get the error message saying [Makefile:8: ../config.mk:No such file or directory make: ***
No rule to make target ‘../conifg.mk’. Stop], Move up one directory and execute [make config].
You will get config.mk. Then move back to the clients directory and execute make command.
# cd ..
# make config
# cd clients
