Instructions for programming
Page 30 of 42
4.3.5 ~ Discount Value
General Menu
⤷
Main machine
⤷
Discount Value
⤷
Product xx = 0.00
In this function you can set the discount value for each selection.
Example:
Coin price
Product 11 = 1.00
Discount price
Product 11 = 0.60
Final price = Coin price - Discount price = 1.00 - 0.60 = 0.40
If the discount price is higher than the coin price, the vending machine is in free vend.
This function is enabled only if you have set correctly the period as shown on page 23.
4.3.6 ~ Set product age control
General Menu
⤷
Main machine
⤷
Set Product Age Control
⤷
Product xx = 0.00
In this function you can set the age control validation for each selection.
During the vend session if you chose a product with the age control the vending machine require a validation,
after you have done that the vending machine will allow you to buy the product.
When the vend finishes the validation is kept for 20 seconds; you can make another vend without doing the
validation.
To set the age limit use the submenu "Age limit" as shown on page 25.
This function is enabled only if you have set correctly the period as indicated on page 23.
4.3.8 ~ Set product inhibit
General Menu
⤷
Main machine
⤷
Set Product Inhibit
⤷
Product xx = Disabled
In this function you can set the product inhibition for each selection.
This function is enabled only if you have set correctly the period as indicated on page 24.
