Iono Arduino Software Development
Since Iono Arduino is just a super-sized I/O shield for a standard Arduino, you don’t need
any specific library to work on it.
Our libraries and examples, available with source code on GitHub, will provide you with
some handy utilities to speed up your development, including functionalities to monitor the
inputs (filtering out possible noise) and control the outputs, HTTP APIs, Modbus support
and much more.
Go to
https://github.com/sfera-labs/iono/wiki
to access the code and documentation.
Programming
Arduino Uno
The Arduino Uno board, when mounted into a Iono Arduino module, must be programmed
through the USB port.
Arduino Ethernet
The Arduino Ethernet board requires the “USB Serial Light Adapter” for programming, as
shown below.
FIGURE 4
THE USB SERIAL ADAPTER
In order to access the programming connector inside the Iono Arduino module, the cover
placed on the same side of the power supply terminal block must be removed, gently
sliding it outward, and giving access to the programming connector indicated by the red
arrow. The yellow arrow indicates the reset button of the Arduino board.
22
User Guide
