background image

AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference

152

Proprietary and Confidential - Contents subject to change

4118047

!STKMS

Inform SIM of menu item selection or provide help information

Host uses this command to tell the SIM which menu item was selected, or to request that the 

SIM provide help information for a menu item.

Supporting devices:

 WP76xx/WP77xx. Not supported by WP8548/WP75xx.

Password required:

 No

Usage:

Execution:

AT!STKMS=<item>[, <help>]

Response:

OK

or

ERROR

or

Error code: <error>

Purpose:

Indicate to the SIM that menu <item> was selected, or that the SIM must 

provide help information for the menu <item>.

Query List:

AT!STKMS=?

Purpose:

Return the execution command format. See the parameter descriptions 

below for details.

Parameters:

<item> (Menu item)

Integer value

<help> (Request help text or menu selection)

0 (Default)—Request SIM to select menu item

1—Request SIM to provide help info to the host for the specified <item> by issuing a 
DISPLAY TEXT proactive SIM command.

<error> (Error reason)

1—SIM card busy

2—General failure

Table 4-2: SIM Toolkit Command Details (Continued)

Command

Description

Summary of Contents for AirPrime WP75 Series













































































































































































































































































































Reviews: