AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
272
Proprietary and Confidential - Contents subject to change
4118047
+WDSI (notification)
(continued)
AirVantage Management Services events—Unsolicited notification
(continued)
•
9—Package is available on the server and can be downloaded by the module. A
<Data> parameter is returned indicating the package size in kBd.
•
10—Package was successfully downloaded and stored in flash.
•
11—One of the following issues happened during the package download:
•
If the download did not start (a +WDSI <Event>=9 indication has not been
received), there is not enough space in the device to download the package.
•
If the download started (a +WDSI <Event>=9 indication has been received), a flash
problem implies that the package has not been saved in the device.
•
12—Downloaded package is certified to be sent by the AirVantage server.
•
13—Downloaded package is not certified to be sent by the AirVantage server.
•
14—Update will be launched.
•
15—OTA update client has finished unsuccessfully.
•
16—OTA update client has finished successfully.
•
17—Reserved
•
18—Download progress:
•
No <Data> parameter—Download start
•
<Data> parameter—Percentage progress
•
19–22—Reserved
•
23—Session type (only in LWM2M protocol)
•
24—AirVantage server requests that the device make a reboot. The device requests a
user agreement to allow the module to reboot. The response can be sent using
+WDSR (see
on page 273) and this indication can be returned by the device
if the user has activated the user agreement for connection (see
<Data> (Additional data for specific <Event>s)
•
(<Event>=5) To be defined
•
(<Event>=9) Package size:
•
Package size in bytes, which will be downloaded
•
Preempted DOTA area size needed to download an update package
•
If preemption is not made, this parameter is not returned for this event.
•
If a reverse package is not downloaded and stored, the preempted area will be
released after the installation.
•
(<Event>=11) Download failure reason:
•
0=Insufficient memory in device to save firmware update package. Package was
not downloaded.
•
1=HTTP/HTTPS error occurred. See
on page 268 for possible error
values.
•
2=Corrupted firmware update package, did not store correctly. Reasons include (or
example), mismatched CRCs between actual and expected, or signature check
error.
•
(<Event>=18) Download progress:
•
Integer value (% complete)
•
(<Event>=23) Session event type:
•
0=Bootstrap session
•
1=Device management session
Table 14-2: AirVantage Device Services Command Details (Continued)
Command
Description
