AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
180
Proprietary and Confidential - Contents subject to change
4118047
!DAWSTXCW
Set waveform used by the transmitter (WCDMA only)
Set the waveform used by the transmitter—the modem can transmit either in carrier wave
or WCDMA modulated.
Requirements:
•
to enter FTM mode.
•
to set the device to a WCDMA band.
•
to set the uplink channel for the selected band.
Password required:
Yes (see
for details)
Usage:
•
Execution:
AT!DAWSTXCW=<waveform>
Response:
OK
Purpose:
Set the transmitter waveform.
Parameters:
<waveform> (Waveform used by the transmitter)
•
0=WCDMA
•
1=Carrier wave (no modulating signal applied)
!DAWSTXPWR
Set desired Tx power level (WCDMA mode only)
Enable/disable Tx power output and set the desired Tx power level in dBm.
Requirements:
•
The modem must be in WCDMA mode.
•
to enter FTM mode.
•
to set the device to a WCDMA band.
•
to set the uplink channel for the selected band.
•
to turn the transceiver PA.
Password required:
Yes
Usage:
•
Execution:
AT!DAWSTXPWR=<enable>,<power_dBm>
Response:
OK
Purpose:
Enable/disable Tx power output and set the Tx power level to the
requested <dBm> level.
Parameters:
<enable> (Enable/disable Tx power output)
•
0—Disable
•
1—Enable
<power_dBm> (Desired Tx power in dBm)
•
-57 to 23
Table 6-2: Test Command Details (Continued)
Command
Description
