Rev.
6
Oct.18
Proprietary and Confidential - Contents subject to change
155
!STKPD
Select host-supported STK features
Host uses this command to select the set of STK features the host will support and inform the
SIM of the set. The module must be reset for the selected set of features to take effect.
Supporting devices:
WP76xx/WP77xx. Not supported by WP8548/WP75xx.
Password required:
No
Usage:
•
Execution:
AT!STKPD=<bitmask>
Response:
OK
or
ERROR
Purpose:
Indicate to the SIM which STK features the host will support after the next
reset.
•
Query:
AT!STKPD?
Response:
Profile config=<bitmask>
OK
Purpose:
Report the current set of host-supported STK features by displaying the
<bitmask>. Refer to the parameter description below to decode the settings.
•
Query List:
AT!STKPD=?
Purpose:
Return the execution command format. See the parameter descriptions
below for details.
Parameters:
<bitmask> (Host-supported STK features)
•
7-byte Hex string, big-endian format.
Example: Byte order: 07060504030201; Bit order: 76543210
•
Bit value 1=Supported; Bit value 0=Not supported
•
Note: Feature descriptions below include a code in brackets (e.g. "(B16b2)". This
refers to the position of the bit in the terminal profile message according to
3GPP TS 11.14, using the following encoding:
BX = Byte X
bY = Bit Y
•
Byte 01:
•
Bit 0—Menu selection support (B1b4)
•
Bit 1—Support for alpha in call control (B2b5)
•
Bit 2—UCS2 entry support (B2b6)
•
Bit 3—UCS2 display support (B2b7)
•
Bit 4—Display Text command support (B3b1)
•
Bit 5—Get Inkey command support (B3b2)
•
Bit 6—Get Input command support (B3b3)
•
Bit 7—Play Tone command support (B3b5)
(Continued on next page)
Table 4-2: SIM Toolkit Command Details (Continued)
Command
Description
