SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
34
2.5.10 User command mode
Enter the user command in Enable mode. Then, the user mode shows as follows:
SWH# user
SWH(user)#
Command
Purpose & Description
Usage
=================== =========================== =============================
<name> Edit User <name>
add Add User add <name> [pass] <level>
delete Delete User del <username>
exit Exit from current mode exit
show Show User Settings show
SWH(user)#
Prompt
Command & Parameter
Description
add <username> [password]
<administrator | read_and_write |
read_only | access_denied>
Add a new user and specify its access
privilege.
<username>: Specify the new username.
[password]: Specify this username’s
password (optional). This password is used
to login to CLI and Enable mode.
<administrator | read_and_write |
read_only | access_denied>: Four
operation privileges are available in the
Managed Switch.
Administrator: Full access right includes
maintaining user account and performing
Firmware upgrade.
Read & Write: Full access right but cannot
modify user account and perform Firmware
upgrade.
Read Only: Allow to retrieve information
only. In CLI, a user with “read only”
privilege can not enter enable mode.
Access Denied: Access to the Managed
Switch is completely forbidden.
For example:
SWH(user)# add user1 user1 administrator
delete <username>
Delete a registered user.
For example:
SWH(user)# delete user1
exit
Quit the current mode and return to Enable
Mode.
SWH(user)#
show
Show currently-registered usernames.
SWH(user_
userna
me
)#
state <enable | disable>
To enable or disable this new login user
account.
