SIGNAMAX a.s.
Office: Vlarska 22, 627 00 Brno, CZ
T:+420 533 338 854 l F:+420 533 338 883 l www.signamax.eu
47
you would like to use IGMP filtering function,
make sure IGMP is activated; otherwise,
IGMP filtering will not be enabled even though
you issue “enable” command.
channel <port_list> <1-128>
Specify the maximum transport multicast
channels that can be received.
<port_list>: Specify a port number or multiple
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12.
<1-128>: Specify the channel number
between 1 and 128.
For example:
SWH(config-igmpfilter)# channel 1-4,10-
15,18,19 10
state <port_list> <enable | disable>
To enable or disable each port’s IGMP filtering
function.
<port_list>: Specify a port number or multiple
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12.
For example:
SWH(config-igmpfilter)# state 1-4, 10-15, 18,
19 enable
filter <port_list> <profile_name>
<profile_name> ...
This allows the specified IP multicast profile
information to pass-through.
<port_list>: Specify a port number or multiple
port numbers with the format 5, 7, 8, 9, 12 or
5, 7-9, 12.
<profile_name>: Specify an existing profile
name. (The field for profile name is from the
entry registered in Profile option.)
For example:
SWH(config-igmpfilter)# filter 1-4 myprofile
exit
Quit the current mode and return to
Configuration mode.
igmpfilter)#
show
Show current IGMP filtering settings.
2.6.5 MAC command mode
Enter the mac command in Configuration mode. Then, the mac mode shows as follows:
SWH(config)# mac
SWH(config-mac)#
Command
Purpose & Description
Usage
=================== ===========================
=============================
static Enter Static Cmd. Mode static
exit Exit from current mode exit
SWH(config-mac)#
Prompt
Command & Parameter
Description
SWH(config-mac-
static)#
add <mac-addr> <vlan_id> <port |
filter>
To forward or filter packets from a MAC
address.
