Tally Dascom DT-210/230 Programming Guide V1.1
- 45 -
9 Mechanical Control Commands
GS V
[Function]
Select cut mode and cut paper
[Format]
<A> ASCII
GS V m
Hex
1D 56 m
Decimal
29 86 m
<B> ASCII
GS V m n
Hex
1D 56 m n
Decimal
29 86 m n
[Range]
<A> m = 0, 1, 48, 49
<B> m = 65, 66, 0 <n ≤ 255
[Description]
Executes paper cutting specified by m.
m
Function
＜
A>
0
，
48
1
，
49
Cuts paper.
＜
B>
65
，
66
Feeds paper to (cutting po [n × (vertical motion unit)]) and
cuts the paper.
[Note]
This printer executes a partial cut (one point left uncut).
ESC i [obsolete command]
[Function]
Partial cut (one point left uncut)
[Format]
ASCII
ESC i
Hex
1B 69
Decimal
27 105
[Description]
Executes a partial cut of the roll paper.
[Note]
• See
GS V <Function A>
for details.
• The cutting shape depends on the specification of the mounted auto-cutter.
ESC m [obsolete command]
[Function]
Partial cut (three points left uncut)
[Format]
ASCII
ESC i
Hex
1B 6D
Decimal
27 109
[Description]
Executes a partial cut of the roll paper.
[Note]
• See
GS V <Function A>
for details.
• The cutting shape depends on the specification of the mounted auto-cutter.
Summary of Contents for DT-210
Page 1: ......
