Tally Dascom DT-210/230 Programming Guide V1.1
- 16 -
command. Users must consider this.
Example: Graphic data might accidentally include a data string matching this command.
• Do not embed this command within another command.
Example: Graphic data might include this command.
DLE DC4 fn a b (fn = 2)
[Function]
Execute power-off sequence
[Format]
ASCII
DLE DC4 fn a b
Hex
10 14 fn a b
Decimal
16 20 fn a b
[Range]
fn = 2
a = 1
b = 8
[Description]
• Executes the printer power-off sequence and transmits the power-off notice.
• Stores the values of the maintenance counter.
• Sets the interface to BUSY.
• Sets the printer to standby mode.
[Note]
Take the following into consideration:
• If the received data includes a data string matching this command, the printer
performs the command. Users must consider this. Example: Graphic data might
accidentally include a data string matching this command.
• Do not embed this command within another command. Example: Graphic data might
include this command.
• This command does not shut the power off. The operator must turn the power off
after receiving the power-off notice.
• If this command is executed, the printer will not continue to process anything. To
recover the printer to print again, it is necessary to turn the power on again or execute a
hardware reset.
DLE DC4 fn d1…d7 (fn = 8)
[Function]
Clear buffer(s)
[Format]
ASCII
DLE DC4 fn d1…d7
Hex
10 14 fn d1…d7
Decimal
16 20 fn d1…d7
[Range]
fn = 8
d1 = 1, d2 = 3, d3 = 20, d4 = 1, d5 = 6, d6 = 2, d7 = 8
[Description]
• Clears all data stored in the receive buffer and the print buffer and transmits Clear
response.
• If a recoverable error occurs, recovers from the error.
[Note]
• Take the following into consideration:
• If the received data includes a data string matching this command, the printer
performs the command. Users must consider this.
Example: Graphic data might accidentally include a data string matching this command.
• Do not embed this command within another command.
Summary of Contents for DT-210
Page 1: ......
