48
Pos.
Nr.
DESCRIPTION
Where:
VAL
Mean
– Value calculated during actual cycle
4
;
VAL
Mean-1
– Value calculated during previous cycle;
CONST – Averaging constant;
REALVAL – Real value detected on digital input.
6.3.1.4.3
I/O properties
I/O properties are additional data sources, which are recorded along with usual GPS data.
I/O#0 property parameter (ID=300)
Parameter defines I/O property value. Possible values are given below.
Table 13 I/O Property Parameter Values
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
-
I/O#0 averaging constant (ID=305)
S8
I/O#0 priority (ID=301)
Parameter defines I/O property type of priority: 0 is low, 1 – high, 2 – panic, 3 – empty, 4 –
SW21, 5 – SW22, 6 – SW23, 7 –SW24.
Table 14 I/O Type of Priority
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
7 (exl. 3)
0
I/O#0 averaging constant (ID=305)
S8
I/O#0 High level (ID=302)
Parameter defines high value of triggered I/O property. This parameter is used to set
thresholds for I/O properties to generate events.
Table 15 I/O High Value
4
One cycle equal to 20 ms.
