45
_(HexHex) is used to specify 2
nd
Busy-line Code.
_(HexHex) is used to specify 2
nd
No-answer Code.
_(HexHex) is used to specify 2
nd
All-call Code.
_(HexHex) is used to specify 2
nd
Recording-request Code.
_(HexHex) is used to specify 2
nd
Recording-interruption Code.
_(HexHex) is used to specify 2
nd
Recording-continuation Code.
_(HexHex) is used to specify 2
nd
Recording-completion Code.
_[XX] is used to specify 3
rd
EXTN Field.
_[XXYY] is used to specify 3
rd
Type Field and LN Field.
_(HexHex) is used to specify 3
rd
Mailbox Program Access Request Code.
_(HexHex) is used to specify 3
rd
Recording-request Code.
If you haven’t information about a type of character string content, you may take the following
actions to enable the EVM to report the Hex values being stored in the input data buffer.
1.
Enter SYS_8_[00] to clear the data buffer and exit from the System Program and then hang up.
2.
Dial an internal phone for the call-forwarding type you want.
3.
Log in to the system program when the EVM answers your call.
4.
Enter SYS_8_[01] to listen to the first eight bytes of the character string.
5.
Press 2 for the next 8 bytes.
6.
Repeat Step 5 until you hear the ending character or “0000”. The end of a character string is
usually a "CR (0D)", "LF (0A)" or both.
7.
Hang up the call or repeat Steps 1 ~ 6 for another call type.
Example:
Byte
sequence
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
1
st
string:
STX
9
1
2
0
1
2
0
2
2
7
0
CR LF
2
nd
string:
STX
9
1
3
0
3
9
2
7
1
CR LF
3
rd
string:
STX
9
4
0
1
2
0
2
2
7
1
CR LF
4
th
string:
STX
9
8
3
0
2
7
0
2
7
0
CR LF
The assumptions of the above character strings are:
-
The extension ports from 270 to 273 are already in sequence connected to the Line ports of L1,
L2, L3 and L4. The longest digit length of the extension numbers of the PBX is three-digit.
-
In the 1
st
string, "91" is the No-answer Code of internal calls, "201" is the caller and "202" is
the original destination.
-
In the 2
nd
string, "91" is the No-answer Code of internal calls, "30" is the caller and "39" is the
original destination.
-
In the 3
rd
string, "94" is the No-answer Code of external calls, "01" is the number of the trunk
line, and "202" is the original destination.
-
In the 4
th
string, "98" is the Recording-request Code and "30" is the phone number of the
