Chapter 19 6VPE Configuration
Step
Command
Function
ZXR10(config-vrf-vrf-name-af-ipv6)#
export map
<
route-map-name
>
Configures the export map
associated with the VRF. The
name of the route map is 1 to
31 characters in length.
3
ZXR10(config-vrf-vrf-name-af-ipv6)#
import map
<
route-map-name
>
Configures the import map
associated with the VRF. The
name of the route map is 1 to
31 characters in length.
10. Verify the configurations.
Command
Function
ZXR10#
ping6
[
vrf
<
vrf-name
>]{<
ipv6-address
>|
domain
<
domain-name
>}{[
limit
{
0
|<
limit-num
>}]
,
[
repeat
<
repeat-count
>]
,
[
size
<
datagram-size
>]
,
[
timeout
<
timeout
>]
,
[
interface
<
interface-name
>]
,
[
source
<
source-address
>]}
Checks network connectivity.
ZXR10#
show ip vrf
[[[
brief
|
detail
][<
vrf-name
>]]|
summary
]
Displays the VRF information.
ZXR10#
show ipv6 protocol routing vrf
<
vrf-name
>[[
network
<
ipv6-address
>[
/
<
mask_len
>]]|<
protocol
>|
database
]
Displays the VRF routing table.
– End of Steps –
19.3 6VPE Configuration Example
Configuration Description
As shown in
, CE1 and CE2 are in the same VPN. The loopback address of
CE1 is 1001::10:1/112, and the loopback address of CE2 is 2002::10:1/112.
It is required to configure a VPN and OSPFv3 to make CE1 and CE2 learn routes from
each other. BGP runs between CE1 and PE1, and OSPFv3 runs between CE2 and PE2,
which makes CE1 and CE2 learn routes from each other and can be pinged successfully.
19-11
SJ-20140504150128-018|2014-05-10 (R1.0)
ZTE Proprietary and Confidential
