LAPB and X.25 Configuration Commands
385
Table 23
Input rules of X.121 address mode matching string
For the related commands, see display x25 switch-table svc.
Example
Add an X.25 switching route, whose destination address is 8888 and forwarding
address is the hunt group hg1, and substitute the destination address with 9999.
[3Com] x25 switch svc 111 sub-dest 9999 sub-source 8888 hunt-group
hg1
x25 switch svc xot
Syntax
x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] xot ip-address1 [ ip-address2 ] … [ ip-address6 ] [ xot-option ]
undo x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source
source-address ] [ xot ip-address1 [ ip-address2 ] … [ ip-address6 ] ]
View
System view
Parameter
x.121-address: Destination address of X.121. This parameter consists of mode
matching string, and its length ranges from 1 to 15 characters. For the specific
description of mode matching, see Table 10-4 and Table 10-5.
sub-dest destination-address: Substitution destination address.
sub-source source-address: Substitution source address.
ip-address1 - ip-address6: Destination IP address of XOT connection, up to 6
addresses can be configured.
xot-option: XOT channel parameter option. For the specific configuration, see XOT
channel parameter option.
.
Matching arbitrary single character
l.st
.*
Matching arbitrary zero or more characters.
fo.*
.+
Matching arbitrary one or more characters.
fo.+
Characters
Input rules
*
Cannot be placed at the beginning of character string
Cannot be placed after the symbol ^
Cannot be placed before and after the s and *.
+
Cannot be placed at the beginning of character string
Cannot be placed after the symbol ^
Cannot be placed before and after the s and *.
\
Cannot be placed at the end of character string
^
Cannot be placed before the s and *.
Summary of Contents for Router 3000 DSL Series
Page 6: ......
Page 686: ...686 CHAPTER 6 ROUTING PROTOCOL ...
Page 758: ...758 CHAPTER 7 MULTICAST COMMON CONFIGURATION COMMANDS ...