Enable the SSH service of Raspberry Pi and set WIFI for Raspberry Pi
The way we use does not need to set up the Raspberry Pi with peripherals such as
display and keyboard. While waiting for the Raspberry Pi system to write to the SD
card, you can proceed to prepare two files and copy the two files to the SD card to
be burned with the Raspberry Pi system. And then insert the SD card into the
Raspberry Pi to boot. The Raspberry Pi will automatically start the SSH service and
connect to WIFI. You can remotely control the Raspberry Pi to perform the
installation of the robot software.
Since some operations involve changing the file extension, first you need to display
the file extension:
File Explorer-View-Tick file name extensions
Create a new file named
ssh
anywhere on your computer without any extension.
You can create a new ssh.txt first and then delete the .txt.
Create a new file named
wpa_supplicant.txt
, and write in the following content
country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="WIFI"
psk="PASSWORD"
key_mgmt=WPA-PSK
priority=1
}
