34
SMS command
Action
[password] set mode
beacon
[password] set mode b
To set Beacon mode. The device will go to sleep
until one of two timers is activated, a signal at
external input appears or alarm event occurred.
The period of activity before going to sleep is
10 minutes. Password is required to execute the
command.
SMS command sample:
1234 set mode beacon
SMS response sample:
Device mode is set to beacon
SMS error response sample:
Invalid device mode
[password] set mode track
[password] set mode t
To set Tracker mode (the device will be always
ON). Password is required to execute the
command.
SMS command sample:
1234 set mode track
SMS response sample:
Device mode is set to tracker
SMS error response sample:
Invalid device mode
[password] set mode ?
To ask for the current operating mode. Password
is required to execute the command.
SMS command sample:
1234 set mode ?
SMS response samples:
Current mode is beacon
Current mode is tracker
[password] set server on
To switch server data transfer ON. You can control
the device via Author Connect mobile app or
via SMS commands. Password is required to
execute the command.
SMS command sample:
1234 set server on
SMS response sample:
MQTT server enabled
[password] set server off
To switch server data transfer OFF. You can
control the device only via SMS. Password is
required to execute the command.
SMS command sample:
1234 set server off
SMS response sample:
MQTT server disabled