Log Strings
Interfacing Voyage Data Recorder Systems, AutroSafe Interactive Fire-Alarm System, 116-P-BSL336/EE, RevA 2007-01-25,
Autronica Fire and Security AS
Page 33
Operator Events connected to Detection Zones
The AutroSafe panel allows users to acknowledge early warnings and
pre-alarms, these events are logged as EVE strings related to a
detection zone (because acknowledge operates at the level of
detection zone, not individual point).
In addition, the SILENCE button implicitly accepts alarms.
Description text
Function
Comment
Fire ElyWrACK:
Early Warning acknowledge
Fire PreAlACK:
Pre-Alarm acknowledge
Fire AlACK On:
Alarm acknowledge
Note: Alarm ACK is reported in
combination with the current DZ
activation state. See the previous
paragraph.
$FREVE,000001,DZ00527,Fire ElyWrACK: TEST DZ20F Name*14
$FREVE,000001,DZ00529,Fire PreAlACK: TEST DZ211 Name*73
$FREVE,000001,DZ00522,Fire AlACK On: TEST DZ20A Name*4F
$FREVE,000001,DZ00523,Fire AlACK T1: TEST DZ20B Name*09
$FREVE,000001,DZ00524,Fire AlACK S2: TEST DZ20C Name*0B
Fault reports
AutroSafe reports faults using two parameters
Class
and
Reason
; the
VDR log shows numeric values for both of these, but due to space
considerations, only the reason text is included. If a fault text is
needed, the class/reason numbers can be cross-referenced with the
AutroSafe Configuration Tool’s Menu Config.
Fault reports exist as either “Unit Fault” or “Zone Fault”; there is no
functional difference between the two fault types, the difference is
included to facilitate readability.
Description text
Functionality
Comment
Unit Fault :
The first occurrence of a fault
Unit FaultACK:
A panel operator has
accepted an existing fault
Unit FaultOK :
The system has determined
that a Fault has been
repaired.
When the operator presses the panel's
RESET button all faults are accepted.
If the faults are still present they may
be re-reported from the hardware units
involved.
Unit FaultOKn:
The system has determined
that a Fault has been
repaired, but the operator has
not yet accepted it.
Depending on Config, some faults will
be removed from the panel without
prior accept.
