Chapter 3: Accessing the PM IPDU via the Command Line Interface
31
temperature
The temperature command displays the PM IPDU’s surrounding temperature and the maximum
temperature the unit has registered (temperature peak). It may also be used to clear the saved peak
temperature value.
Syntax
temperature [<IPDU#>|<IPDU_ID>]|reset
Arguments
Examples
To get the temperature for all units in a daisy chain, enter:
To get the temperature for specific unit, provide the unit number as an argument, enter
the following.
To reset the maximum temperature registered and use reset as an argument, enter:
unassign
The unassign command removes the assignment of an outlet or group of outlets from a given user.
This command is available to the admin user only.
Syntax
unassign <outlet_string> <user>
<IPDU#>
IPDU number in a daisy chain
<IPDU_ID>
Identification string previously set by the id command
reset
Resets the maximum temperature registered
pm>
temperature
pm>
temperature 2
pm>
temperature reset
pm_install_admin_user.book Page 31 Tuesday, March 24, 2009 3:02 PM
