3 SCPI
3.3 Instrument-specific Commands
97
Example:
:MMEM:STORe:LOSS AFTer,”D:\EnrData\lossTable01.los”
Key path:
Front panel
【
File
】
—>[Save]—>[Before DUT Table/After DUT Table]
[ Save Limit Line ]
:MMEMory:STORe:LIMit
Function description:
This command is used to save the specified limit line to the specified file.
Setting format:
:MMEMory:STORe:LIMit LLINe1|LLINe2|LLINe3|LLINe4,<file_name>
Parameter description:
LLINe1: Limit line 1
LLINe2
：
LimitLine2
LLINe3
：
LimitLine3
LLINe4
：
LimitLine4
<file_name> File name, the file extension is .STA.
The file names are put in double quotes. There are two ways to express the file
name path: if the file name is a relative file name and does not include a path, the
file path is loaded under the corresponding folder of D:\EnrData;
If the file name is an absolute file name and contains an absolute path, the
corresponding file is loaded from this path and the path is separated by a right slash.
Example:
:MMEM:STOR
e:LIM LLINe1,”D:\EnrData\limitLine01.lim”
Key path:
Front panel
【
File
】
—>[Save]—>[Limit Line 1/2/3/4]
[ Save Trace ]
:MMEMory:STORe:TRACe
Function description:
This command is used to save the specified trace to the specified file.
Setting format:
:MMEMory:STORe:TRACe TRACE1|TRACE2,<file_name>
Parameter description:
<file_name> File name, the file extension is .STA.
The file names are put in double quotes. There are two ways to express the file
name path: if the file name is a relative file name and does not include a path, the
file path is loaded under the corresponding folder of D:\EnrData;
If the file name is an absolute file name and contains an absolute path, the
corresponding file is loaded from this path and the path is separated by a right slash.
Example:
:MMEM:STOR:TRAC TRACE2,”D:\EnrData\mytrace.csv”
Key path:
Front panel
【
File
】
—>[Save]—>[Trace]
3.3.15 Noise Source Setup
Set the noise source type and others.
[ Noise Source Model ]
:SENSe:SOURce:NOISe:STYLe
Function description:
This command is used to set/query the noise source type.
Setting format:
:SENSe:SOURce:NOISe:STYLe SNS|NORMal
Query format:
:SENSe:SOURce:NOISe:STYLe?
Return value:
SNS|NORM
