33
COMMAND
Description and Parameters
get out A osd transparency
Show the current transparency level of the OSD on the HDMI output.
set edid N1 name N2
Set the name for the specified EDID. (Only User EDIDs may be
renamed)
N1
= 7~8
[EDID number]
N2
= {Name}
[16 characters maximum]
get edid N1 name
Show the name for the specified EDID.
N1
= 7~8
[EDID number]
set all in edid mode N1
Select the EDID management mode to use (All or Appoint) for all inputs.
Available values for
N1
:
OFF
[Appoint
EDID
mode]
ON
[All
EDID
mode]
get all in edid mode
Show the current EDID management mode used by all inputs.
set all in edid N1
Set the EDID to use when the “All” EDID mode is active.
Available values for
N1
:
1
[Internal
EDID
1]
2
[Internal
EDID
2]
3
[Internal
EDID
3]
4
[Internal
EDID
4]
5
[Internal
EDID
5]
6
[Internal
EDID
6]
7
[User
EDID
1]
8
[User
EDID
2]
9
[Sink
EDID]
get all in edid
Show the current EDID used by the “All” EDID mode.
