9.4.18 Sets the “store in memory” function
•
Command
syntax:
“.SM#”
[CR]
•
Command
answer:
[LF]
•
Command action:
sets the “store in memory” function
•
Parameter range:
#= 0 or 1.
Description: this command stores in memory the TAG’s ID correlated with the current date and time.
1: enable function. 0: disable function.
9.4.19 Gets the “store in memory” function status
•
Command
syntax:
“?SM”
[CR]
•
Command answer:
[CR][LF] ”SM=#” [CR][LF]
•
Command action:
gets the “store in memory” function status
•
Parameter range:
#= 0 or 1.
Description: this command returns the store in memory function status.
9.4.20 Sets the “memory hit” function
•
Command
syntax:
“.MH#”
[CR]
•
Command
answer:
[LF]
•
Command action:
sets the “memory hit” function
•
Parameter range:
#= 0 or 1.
Description: this command enables and disables the memory hit function.
1: enable function. 0: disable function.
9.4.21 Gets the “memory hit” function
•
Command
syntax:
“?MH”
[CR]
•
Command answer:
[CR][LF] ”MH=#” [CR][LF]
•
Command action:
gets the “memory hit” function status
•
Parameter range:
#= 0 or 1.
Description: this command returns the memory hit function status.
1: enable function. 0: disable function.
9.4.22 Sets the “selected hit” function
•
Command
syntax:
“.SH#”
[CR]
•
Command
answer:
[LF]
•
Command action:
sets the “selected hit” function
•
Parameter range:
#= 0 or 1.
Description: this command enables and disables the selected hit function.
1: enable function. 0: disable function.
R-PO7470 Manual – v. 1.1 – August 2008
28
