Datamars Textile ID R-PO7470 User Manual Download

Page: 3 / 31

9.4.6

Sets the date’s day of the week....................................................................................... 25

9.4.7

Sets the current date format ............................................................................................ 26

9.4.8

Gets the current date format............................................................................................ 26

9.4.9

Gets the current date ....................................................................................................... 26

9.4.10

Sets the time’s hour ......................................................................................................... 26

9.4.11

Sets the time’s minute ..................................................................................................... 26

9.4.12

Sets the time’s second .................................................................................................... 26

9.4.13

Gets the current time ....................................................................................................... 27

9.4.14

Clears the memory’s data................................................................................................ 27

9.4.15

Downloads the memory’s data ........................................................................................ 27

9.4.16

Clears the message area ................................................................................................ 27

9.4.17

Write a message to the display ....................................................................................... 27

9.4.18

Sets the “store in memory” function................................................................................. 28

9.4.19

Gets the “store in memory” function status ..................................................................... 28

9.4.20

Sets the “memory hit” function......................................................................................... 28

9.4.21

Gets the “memory hit” function ........................................................................................ 28

9.4.22

Sets the “selected hit” function ........................................................................................ 28

9.4.23

Gets the “selected hit” function........................................................................................ 29

9.4.24

Sets the “reading beep” function ..................................................................................... 29

9.4.25

Gets the “reading beep” function status .......................................................................... 29

9.4.26

Sets the “key beep” function............................................................................................ 29

9.4.27

Gets the “key beep” function status................................................................................. 29

9.4.28

Sets the reading timeout.................................................................................................. 30

9.4.29

Gets the reading timeout ................................................................................................. 30

9.4.30

Sets the shutdown timeout .............................................................................................. 30

9.4.31

Gets the shutdown timeout.............................................................................................. 30

9.4.32

Sets the VCP baud rate ................................................................................................... 30

9.4.33

Gets the VCP baud rate .................................................................................................. 31

9.4.34

Sets the “auto shutdown” function ................................................................................... 31

9.4.35

Gets the “auto shutdown” function status ........................................................................ 31

9.4.36

Firmware update function ................................................................................................ 31

R-PO7470 Manual – v. 1.1 – August 2008

Summary of Contents for Textile ID R-PO7470
































Search results

Summary of Contents for Textile ID R-PO7470

Reviews:

Related manuals for Textile ID R-PO7470

Brands by name

Popular brands

Datamars Textile ID R-PO7470, User Manual

Search results

Summary of Contents for Textile ID R-PO7470

Reviews:

Related manuals for Textile ID R-PO7470

Brands by name

Popular brands