32
AT Commands
Overview
Parameters/Descriptions
Command
Examples
ATI<n>
Display the confirmation
code.
n=0 : Display "NTT DoCoMo".
n=1 : Display the product
name.
n=2 : Display the version of
the FOMA terminal.
n=3 : Display each element of
the ACMP signal.
n=4 : Display details of
the communication
functions of the FOMA
terminal.
ATI0
NTT DoCoMo
OK
ATI1
FOMA L10C
OK
ATQ<n>
Set whether to display the
result code for DTE.
n=0 : Show (default)
n=1 : Hide
ATQ0
OK
ATQ1
("OK" is not
displayed at this
time)
ATS3=<n>
Set the carriage return
character.
n=13 : Default value (only
"13" can be specified)
ATS3? : Display the current
setting values.
ATS3=13
OK
ATS3?
013
OK
ATS4=<n>
Set the line feed
character.
n=10 : Default value (only
"10" can be specified)
ATS4? : Display the current
setting values.
ATS4=10
OK
ATS4?
010
OK
ATS5=<n>
Set the back space
character.
n=8 : Default value (only "8"
can be specified)
ATS5? : Display the current
setting values.
ATS5=8
OK
ATS5?
008
OK
ATV<n>
Set all result codes to be
displayed in numeric or
alphabetic characters.
n=0 : Display result codes in
numeric values.
n=1 : Display result codes in
text (default).
ATV1
OK
ATX<n>
Set whether to display the
speed in the CONNECT
indication when
connected. Also detect a
busy tone or dial tone.
n=0 : Not detect busy tones,
not detect dial tones,
and not display speed.
n=1 : Not detect busy tones,
not detect dial tones,
and display speed.
n=2 : Not detect busy tones,
detect dial tones, and
display speed.
n=3 : Detect busy tones, not
detect dial tones, and
display speed.
n=4 : Detect busy tones,
detect dial tones, and
display speed (default).
ATX1
OK
ATZ
Reset the AT command
settings to the content
in non-volatile memory. If
this command is entered
during communication,
the settings will not be
reset.
-
ATZ
OK
Summary of Contents for style L-10C
Page 146: ...Kuten Code List for L 10C ...