34
• Command examples
(1)Command to permit all speeds for both upload and download (when cid=2)
AT+CGEQMIN=2
OK
(2)Command to permit only 384kbps for upload and 7,232kbps for download (when cid=2)
AT+CGEQMIN=2,,384,7232
OK
(3)Command to permit 384kbps for upload and all speeds for download (when cid=2)
AT+CGEQMIN=2,,384
OK
(4)Command to permit all speeds for upload and only 7,232kbps for download (when cid=4)
AT+CGEQMIN=4,,,7232
OK
• Operations without a parameter
AT+CGEQMIN=
: Reset all <cid> to their defaults.
AT+CGEQMIN=<cid>
: Reset the specifi ed <cid> to its default.
AT+CGEQMIN=?
: Display a list of values that can be specifi ed.
AT+CGEQMIN?
: Display the current setting values.
■ Command name : +CGEQREQ=[Parameter]
• Overview
Set the QoS (Quality of Service) requested to the network when packet communication is dialed.
Only the command described in the following example can be used, and it is set as default.
This is a setting command, however, it is not reset by &F.
• Format
+CGEQREQ=[<cid>]
• Parameter descriptions
<cid>*: 1 to 11
* <cid> is a number used to manage the access point (APN) for the packet communication
registered in the FOMA terminal.
• Command examples
Command used to require 384kbps upload and 7,232kbps download (when <cid>=2)
AT+CGEQREQ=2,2,384,7232
OK
• Operations without a parameter
AT+CGEQREQ=
: Reset all <cid> to their defaults.
AT+CGEQREQ=<cid>
: Set the specifi ed <cid> as default.
List of Error Reports
Numeric display
Text display
Reason
10
SIM not inserted
A UIM is not inserted.
15
SIM wrong
A SIM other than DOCOMO's UIM (IC card corresponding
to DOCOMO's UIM) is inserted.
16
incorrect password
The password is incorrect.
100
unknown
There is an unknown error.
Summary of Contents for style L-10C
Page 146: ...Kuten Code List for L 10C ...