33
Supplementary Explanation of AT Commands
■ Command name : +CGDCONT=[Parameter]
• Overview
Set access point (APN) for sending packets.
This is a setting command, however, it is not reset by &F.
• Format
+CGDCONT=[<cid>[,"<PDP type>"[,"<APN>"]]]
• Parameter descriptions
<cid>
*1
: 1 to 11
<PDP type>
*2
: PPP or IP
<APN>
*3
: Optional
*1 <cid> is a number used to manage the access point (APN) for the packet communication
registered in the FOMA terminal. From 1 to 11 can be registered in this FOMA terminal.
By default, <PDP_type>=PPP,<APN>=mopera.ne.jp is registered to <cid>=1; <PDP_
type>=PPP,<APN>=mopera.net is registered to <cid>=2; <PDP_type>=IP,<APN>=mopera.
net is registered to <cid>=3; <PDP_type>=PPP,<APN>=mpr.ex-pkt.net is registered to
<cid>=4.
*2 The <PDP type> is the connection method for packet communication.
Select to enter either PPP or IP for the connection method supported by the access point.
*3 <APN> is any text string that indicates an access point.
• Command examples
Command to register an APN with the name of abc (when registering the APN to cid5 )
AT+CGDCONT=5,"IP","abc"
OK
• Operations without a parameter
AT+CGDCONT=
: Reset all < cid> to their defaults.
AT+CGDCONT=<cid>
: Reset the specifi ed <cid> to its default.
AT+CGDCONT=?
: Display a list of values that can be specifi ed.
AT+CGDCONT?
: Display the current setting values
■ Command name : +CGEQMIN=[Parameter]
• Overview
Register the threshold to accept the QoS (Quality of Service) sent from the network when packet
communication is established.
This is a setting command, however, it is not reset by &F.
• Format
+CGEQMIN=[<cid>[,,<Maximum bitrate UL>[,<Maximum bitrate DL>]]]
• Parameter descriptions
<cid>
*1
: 1 to 11
<Maximum bitrate UL>
*2
: None (default) or 384
<Maximum bitrate DL>
*2
: None (default) or 7,232
*1 <cid> is a number used to manage the access point (APN) for the packet communication
registered in the FOMA terminal.
*2 <Maximum bitrate UL> and <Maximum bitrate DL> indicate the maximum communication
speed [kbps] of upload and download traffi c respectively between the FOMA terminal and the
base station. If these settings are set to None (default), all speeds are permissible. Not that
if you set these settings to 384 and 7,232, a packet communication connection may not be
able to be established since any speeds other than those set are not permissible.
Summary of Contents for style L-10C
Page 146: ...Kuten Code List for L 10C ...