84 / 92
3. When ERR LED is on, release the RESET button;
4. Within a few seconds, ERR LED should go off; then press and hold the RESET button again;
5. When the ERR LED blinks, release the RESET button; If the ERR LED goes off, that means
InGateway601 is now restoring to factory default settings;
6. You can log in using the 192.168.2.1.
Appendix II Command Lines
1 Help Command
Help command can be obtained after entering help or “?” into console, “?” can be entered at any time
during the process of command input to obtain the current command or help from command parameters,
and command or parameters can be automatically complemented in case of only command or
command parameter.
1.1 Help command
[Command]
help [<cmd>]
[Function]
get help from command
[View]
all views
[Parameter]
<cmd> command name
[Example]
enter: help
Get the list of all current available command.
enter: help show
Display all the parameters of show command and using instructions thereof.
2 View Switchover Command
2.1 enable
[Command]
enable [15 [<
password
>]]
[Function]
Switchover to privileged user level.
[View]
Ordinary user view.
[Parameter]
15
User right limit level, only supports right limit 15 (super users) at
current.
<
password
>
Password corresponded to privileged user limit level, hint of password
inputting will be given in case of no entering.
[Example]
Enterenable adm in ordinary user view
Switchover to super users and the password 123456
2.2 disable
[Command]
disable
[Function]
Exit the privileged user level.
[View]
Super user view, configure view
[Parameter]
No
[Example]
Enter disable in super user view
Return to ordinary user view.
2.3 end and !
[Command]
end or !
[Function]
Exit the current view and return to the last view.
[View]
Configure view.
[Parameter]
No
